Imetec G7801 Operations Instructions Page 18

  • Download
  • Add to my manuals
  • Print
  • Page
    / 34
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 17
EN
16
The vacuum cleaner does not
suction well
 Electronic power control set to the minimum: increase power
to Medium or Max.
 The dust collection system (14) is full: clean the dust
collection compartment (14A).
 The filter is clogged: clean or replace the filter.
The clogged filter indicator is
on
 The dust collection system (14) is full: empty the dust
collection compartment (14A).
 The filter is clogged: clean or replace the filter.
 The clogged filter LED (2) can even light up if the power
decreases, caused by an object that is too big clogging the
suction pipes: switch the appliance off, disconnect the plug
from the socket and remove the object from the vacuum
cleaner.
 A crevice tool is being used: reduce suction from the
electronic adjustment.
The dust collection system
does not close correctly
 A safety device does not allow the dust collection system to
be inserted if the Hepa filter (14E) is missing.
 Make sure the Hepa filter is present (14E) and it is fitted
correctly.
The vacuum cleaner
produces odours the first
few times it is used
 These odours are harmless and disappear shortly afterwards.
Ventilate the room.
DISPOSAL
The product is packaged in recyclable materials. Dispose of it in compliance with the
environmental protection standards.
The appliance must be disposed of in compliance with EU standard 2002/96/EC.
The recyclable materials contained in the appliance must be collected to prevent
environmental pollution. For further information contact the local waste authority or
the appliance retailer.
ASSISTANCE AND WARRANTY
To request repairs or purchase spare parts please contact IMETEC’s authorised customer
service centre on the Toll-Free Number below or via the website.
The appliance is covered by the manufacturer’s warranty. For details, read the attached
warranty sheet.
Failure to comply with the instructions for use and maintenance provided in this manual will
render the manufacturer’s warranty null and void.
www. imetec.com
Tenacta Group S.p.A. Via Piemonte 5/11 24052 Azzano S. Paolo (BG) ITALY
Tel. +39.035.688.111 Fax +39.035.320.149
MI000956
1212 (MMYY)
MI000956_corretto.indd 16 18/12/2012 17:36:11
Page view 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 33 34

Comments to this Manuals

No comments