Imetec PIUMA NEXT CYCLONIC 1300W PARQUET User Manual download pdf (Page 23)

STORING AND CARING FOR THE PRODUCT

The appliance can be stored in vertical position with the combination brush (6) attached

[FIG. G1].

Attach the combination brush (6) with the bristles in position B (retracted bristles)

to prevent any damage.

TROUBLESHOOTING

PROBLEM SOLUTION

The appliance does not turn

on.

• Ensure that the plug is connected to the socket. Ensure

that the ON/OFF button (11) has been pressed.

The appliance turns off dur-

ing use and does not turn

on again.

• The vacuum cleaner is equipped with a protective motor

thermostat that shuts off the appliance in the event of

overheating! (caused by passageway obstruction or

clogged dust collection system). In the event of its activation,

press the ON/OFF button (11) to turn the appliance off

and let it cool down for a few hours. Remove any dust or

obstructing objects before restarting the appliance.

The vacuum cleaner does

not suction well.

• Electronic power control set to the minimum: Increase

power to Medium or Max.

• The dust collection system is full: empty the dust

compartment.

• The filter is clogged clean or replace the filter.

• The filter is not fastened properly: ensure that the filter is

installed properly.

The dust collection system

is not installed correctly on

the appliance.

• A safety device prevents closing the dust compartment

if the filtering system is missing: ensure that the filtering

system is correctly inserted inside the dust compartment.

The vacuum cleaner

produces odours the

first few times it is used.

• These odours are harmless and disappear shortly

afterwards. Ventilate the room.

MI000889_IT-EN.indd 15 6/6/12 11:00 AM

1 2 ... 18 19 20 21 22 23 24

No comments

Imetec PIUMA NEXT CYCLONIC 1300W PARQUET User Manual Page 23